Heavy-duty 1325 / 4×8 CNC router
Heavy Duty 1325 CNC Router Machine K45MT
K45MT is built for furniture, door, panel and custom woodworking where full-sheet capacity and a simple manual-tool-change production process are the right fit. Its heavy steel frame, 1300 × 2500 × 200 mm working travel, 6 kW air-cooled spindle, vacuum table and DSP A11 handheld control create a practical platform for repeated cutting, grooving, profiling and engraving on flat workpieces.
If most programs use one cutter or only occasional changes, K45MT keeps the process straightforward. If several cutters are repeatedly required in every normal program, an ATC router is the better direction before manual tool changes become the production bottleneck.
Production fit
Built for Full-Sheet Woodworking and Flat-Part Production
Furniture and doors
Cabinet doors, furniture panels, table components, decorative panels and other flat workpieces that need cutting, grooves, pockets, profiles or engraving.
Sheet and mixed materials
Wood, MDF, plywood, particle board, melamine, acrylic, PVC, foam and suitable composites. Soft aluminum remains conditional on tooling, holding and sample validation.
Manual tool-change operation
Best suited to programs that use one cutter or only occasional changes, with manual loading and unloading that still match the required output.
Heavy-duty structure
Stable 4×8 Routing for Repeated Cutting, Grooving and Engraving
Repeated sheet cutting puts continuous load through the frame, gantry, guides and workholding system. K45MT uses a heavy steel frame, square linear guides, stepper drive with Leadshine drivers and a vacuum table to keep the machine focused on stable flat-part routing rather than light-duty engraving alone.
The 6 kW air-cooled spindle gives the machine useful cutting capacity for heavier woodworking tasks, but spindle power is only one part of the process. Cutter diameter, material, depth per pass, tool projection, duty cycle and required finish still determine the correct machining setup.
Is K45MT the Right Machine for Your Production?
K45MT fits well when
- Full 4×8 / 1325 sheet capacity is required.
- Parts are mainly flat and processed from the top.
- Cutting, grooving, pocketing, profiling and engraving make up most of the work.
- One cutter or only occasional manual cutter changes are normal.
- Manual loading and unloading match the required output.
- Vacuum holding or an auxiliary fixture can retain the part safely.
Choose another configuration when
- Several cutters are repeatedly required inside one normal program.
- Dense connector drilling or horizontal holes dominate the process.
- Automatic loading, labeling and unloading are required.
- The workpiece needs undercuts or simultaneous multi-axis access.
- Small, porous or irregular parts cannot be retained safely on the proposed table setup.
Technical specifications
K45MT Technical Specifications
| Item | K45MT | What It Means in Production |
|---|---|---|
| Machine type | 3-axis, single-spindle CNC router | Flat-table routing with manual tool changing. |
| Working travel | 1300 × 2500 × 200 mm | Full 1325 / 4×8 class sheet processing. The 200 mm value is axis travel, not guaranteed material thickness. |
| Spindle | 6 kW air-cooled spindle | Supports heavier woodworking tasks when cutter, depth and feed are matched correctly. |
| Drive | Stepper motor with Leadshine driver | Simple motion-control configuration for this platform. |
| Controller | DSP A11 handheld controller | Machine-side control without keeping a PC connected during normal operation. |
| Table | Vacuum table | Fast holding for suitable flat sheet materials. |
| Vacuum system | 7.5 kW reference pump configuration | Holding depends on sealed area, spoilboard condition, board porosity and cut-through strategy. |
| Max. rapid speed | 35,000 mm/min | Machine movement figure, not a production-output guarantee. |
| Max. cutting speed | 25,000 mm/min | Actual cutting feed depends on material, cutter, depth, finish and tool-life target. |
| Linear guidance | Square linear guides | Supports controlled gantry and axis movement. |
| Options | Dust collection, 4th-axis rotary option, alternate working sizes | Add only when the workpiece or factory process requires them. |
Structure and manufacturing
Heavy Frame, Linear Motion and Vacuum Workholding
The K45MT structure is designed around repeated 3-axis routing rather than complex automation. The heavy frame supports the gantry and table, square linear guides control axis movement, and the vacuum worktable provides broad support for sheet materials.
The complete factory layout should leave service access around the machine, a clear loading path and enough space for dust extraction, electrical access and material handling.
Configuration choices
Choose the Configuration Around the Job
DSP A11 handheld control
Send the CAM software name and a representative program so the postprocessor and controller setup can be checked before production.
Vacuum workholding
Vacuum is effective for suitable flat MDF, plywood, melamine and other sheet materials. Small parts, porous boards, warped stock or irregular workpieces may need tabs, onion skin, clamps or dedicated fixtures.
Dust extraction and rotary work
Dust collection should be sized around material and runtime. A 4th-axis rotary option can be added for suitable cylindrical work after diameter, length, material and required features are confirmed.
Custom Size and Factory Integration
The standard K45MT working travel is 1300 × 2500 × 200 mm. Quick CNC can configure alternate machine sizes when the recurring sheet or part exceeds the standard working envelope.
Destination voltage, phase and frequency should be confirmed before production. The final layout also needs to account for dust collection, controller position, material movement, operator access and maintenance clearance.
Tooling and workholding
Match the Cutter and Holding Method to the Material
| Material / task | Typical process direction | Main point to confirm |
|---|---|---|
| MDF / melamine | Cutting, grooves, pockets, profiles | Edge chipping, dust extraction and small-part retention. |
| Plywood | Cutting, slots, grooves, profiles | Veneer tear-out, voids and cutter wear. |
| Solid wood | Profiles, pockets, decorative work | Grain, moisture, knots, stock flatness and holding. |
| Acrylic / PVC | Cutting and engraving | Heat, chip evacuation, cutter geometry and finish. |
| Foam / composites | Cutting and shaping | Dust or chip control and material-specific tooling. |
| Soft aluminum | Conditional cutting or engraving | Tooling, holding, cutting depth, chip control and sample validation. |
A representative sample is worth testing when surface finish, small-part holding, unfamiliar material or a defined dimensional requirement is important.
Pre-shipment checks
Machine Checks Before Shipment
K45MT is assembled and checked before shipment. The applicable checks depend on the final spindle, table, controller, voltage and options included in the order.
Typical pre-shipment work can include axis movement, reference functions, spindle operation, vacuum-system function, electrical functions, emergency-stop operation, visible assembly condition and representative sample machining when it is part of the agreed acceptance plan.
Measured accuracy, continuous-running duration or sample results are only published when the corresponding machine record supports the claim.
Manual Tool Change, ATC or Dedicated Drilling?
Keep K45MT manual tool change
Use this platform when most programs use one cutter or only occasional changes. It keeps the machine simple when extra automation does not remove a real bottleneck.
Move to ATC
If repeated cutter changes interrupt every normal job, an ATC router reduces the manual stops associated with changing tools and resetting tool length.
Move to drilling equipment
Selected top-side spindle drilling can stay on K45MT when hole quantity remains practical. Dense connector holes, horizontal drilling and six-side processing need dedicated drilling architecture.
Production process
A Typical K45MT Production Scenario
Load MDF, plywood, melamine or a flat solid-wood blank onto the table, set the work origin, run profile cutting, grooves, pockets or engraving, then unload the finished part for sanding, edge banding, side drilling or assembly as required.
This production process is strongest when the program does not stop repeatedly for different cutters. If the CAM file shows several cutter changes in every normal component, revisit the machine choice before the order is finalized.
Manufacturing and quality
From Build to Pre-Shipment Check
Quick CNC has manufactured CNC equipment in Jinan since 2006. A K45MT order moves through configuration confirmation, assembly, electrical setup, machine checks, packing and shipment preparation.
Exact acceptance values follow the machine record and agreed order scope. Generic factory equipment or generated imagery is not used as proof of a specific measured K45MT result.
RFQ inputs
Send the Job Details That Change the Machine Configuration
Workpiece and process
- Material and thickness.
- Largest sheet or workpiece.
- Smallest finished part.
- Cutting, grooving, engraving and hole requirements.
- Number of cutters used in one normal program.
Production and factory
- Drawing, DXF, CAD file or representative photo.
- Daily or shift output target.
- CAM software and controller preference if relevant.
- Destination country, voltage, phase and frequency.
Order, Production and Shipping
Order quantity
No fixed minimum order quantity for this machine.
Production lead
Approximately 45 days after order and configuration confirmation. International freight time is not included.
Export packing and shipping
The machine is prepared for export according to the final configuration and is normally shipped by container.
Installation, Warranty and After-Sales Support
Before installation
Confirm factory power, grounding, dust extraction, floor condition, unloading route, lifting method, service clearance and CAM workstation requirements.
Service scope
Quick CNC can provide manuals, operation videos, remote technical guidance, online training, maintenance guidance, troubleshooting and spare-parts coordination. Quick CNC can arrange paid on-site service when required by the project.
Quick CNC provides a standard one-year machine warranty from the date you receive the machine. Exact coverage, exclusions, parts, freight, travel, labor and service responsibilities follow the final signed agreement.
Common Questions About K45MT
Is K45MT suitable for cabinet doors and furniture panels?
Yes. It is designed for flat-part routing such as cutting, grooves, pockets, profiles and engraving. Dense connector drilling or automatic sheet handling calls for another furniture-production configuration.
Why use a 6 kW air-cooled spindle?
The 6 kW spindle gives K45MT useful cutting capacity for heavier woodworking applications, but the final process still depends on tool diameter, depth, material, duty cycle and required finish.
When should I choose ATC instead?
Choose ATC when repeated cutter changes interrupt most normal programs. If one cutter or occasional manual changes cover the work, K45MT remains the simpler platform.
Can the vacuum table hold small parts?
Not automatically. Holding depends on sealed area, material porosity, spoilboard condition, vacuum zones and cut-through sequence. Small parts may need tabs, onion skin, clamps or fixtures.
Can K45MT drill cabinet holes?
It can perform selected top-side spindle drilling when hole quantity remains practical. Dense connector holes, horizontal drilling or six-side processing should move to dedicated drilling equipment.
Does 200 mm Z travel mean a 200 mm-thick part can be machined?
No. Usable material clearance depends on the table, spoilboard, fixture, cutter projection, spindle nose and safe retract position.
Can it process soft aluminum?
Soft aluminum can be considered only after the cutter, workholding, cutting depth, chip control and sample result are confirmed. K45MT is not positioned as a heavy-metal machining center.
Can I use my current CAM software?
Usually, if a compatible postprocessor is available for the selected controller. Send the software name, version and a representative program before production.
Machine operation
See K45MT in Operation
Use the supplied machine video to review the spindle, gantry, worktable and general operating format before sending the production details.
Tell Us What You Need to Produce
Send the material, dimensions, drawing, tool count, hole requirements, output target, software and destination power. Quick CNC will prepare the K45MT configuration and quotation around the actual job. If the process requires ATC, dedicated drilling or another machine architecture, the quotation will move to the better-matched platform before production begins.